Cart is empty
Areas of uses:
- Hammer insulation fixing with an insulated metal pin designed for embedding of Jointless Facade Thermal Insulation Systems.
- Lowest embedment depth with maximum high performance parameters;
- Shortest drilling depth – saves installation time;
- Highest technical parameters for detachment to ensure the safety of the product;
- Optimal reduction of thermal bridge through the use of stroke-resistant screw overmoulding
- The possibility of using a fixing with an extra KWL insulation holding flange (recommended in the use of mineral-lamella wool);
- Economical consumption through optimal product parameters.
Material:
- Plug Sleeve: impact resistant copolymer of polypropylene PP
- Nail Pin: electro zinc plated pin
- Head Coating: polyamide PA 6.0 ( Nylon) reinforced with fiber glass.
Features
- Simple installation in all standard substrates (A,B,C).
- Excellent plate stiffness (value 1.0 kN/mm) ensures smooth elevation surface and stable insulation system.
- The long plastic overmoulding on the TFIX-8M nail minimises thermal bridging (value 0.002W/K), contributing to energy-saving benefits.
- Unique nail design allows for high load-bearing capacities. This reduces the quantity of fixings required per square metre of insulation.
- The shortest embedment depth at the maximum strength parameters.
- Pre-assembled expansion nail saves time and labour.
- Can be used with additional KWL insulation holding plate, available in 90, 110 and 140mm flange sizes (recommended for soft insulation materials such as mineral wool).
Installation recommendations:
- drill diameter: 8 mm,
- minimum embedment depth: ETA 25 mm
Dedicated substrates:
Performance data for single anchor in tension without influence of edge distance and spacing
| Substrate | Concrete | Solid brick Mz | Sand-lime solid brick KS | Sand-lime perforated brick KSL | Perforated clay brick HLz | Lightweight concrete solid V | Lightweight concrete solid block VBI | Lightweight concrete hollow block HBI | |
| Embedment depth hef | [mm] | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 |
| MEAN ULTIMATE LOAD NRu,m | |||||||||
| TFIX-8M | [kN] | 1.54 | 1.72 | 1.47 | 1.00 | 0.68 | 0.54 | 0.51 | 0.53 |
| CHARACTERISTIC LOAD NRk | |||||||||
| TFIX-8M | [kN] | 1.20 | 1.20 | 1.20 | 0.90 | 0.60 | 0.50 | 0.30 | 0.50 |
| DESIGN LOAD NRd | |||||||||
| TFIX-8M | [kN] | 0.60 | 0.60 | 0.60 | 0.45 | 0.30 | 0.25 | 0.15 | 0.25 |
| RECOMMENDED LOAD Nrec | |||||||||
| TFIX-8M | [kN] | 0.43 | 0.43 | 0.43 | 0.32 | 0.21 | 0.18 | 0.11 | 0.18 |
| Fixing type | TFIX-8M | |
| Plate resistance | [kN] | 1.75 |
| Plate stiffness | [kN/mm] | 1.00 |
| Point thermal transmittance χ | [W/K] | 0.00 |
No posts found
