Product filters vertical Product filters vertical

Insulation

How to insulate a house?

House insulation in general is made during a renovation or while construction. It reduces the heat losses in winter, prevents from cold air, but also prevents from overheating of the house during the summer.  What areas should be insulated? Of course exterior walls, but also floor, foundation, roof, partition walls, ceiling - all the weak points, where is threat of cold air getting in. On the market there are a lot of brands, that offer insulation products. We decided to offer proven quality products, from Polish manufacturers. You can choose between EPS, XPS, PIR boards or mineral wool. Of course should be noted, that each product should be chosen carefully due to it's properties and destination. For wall insulation it is λ (thermal conductivity) value important - the lower, the better. It tells how warm your house will be thanks to it. For floor or parking insulation compressive stress value is important - the higher, the better. This value tells how heavy load EPS board will handle.

Wide range of renders - from mineral ones to silicone-silicate renders together with facade paints allow to secure your walls insulation layer, but also will give your home elegant look. 400 colors to choose allow to create unique facade design.

To each type of insulation there are dedicated different mounting products - glue, pins, fibre glass net, primers. We offer all of them to complete your insulation system. Please find below our offer:

EPS Facade Thermo+ (λ=0,031)
ab 23,03 kr / m² inc. VAT, excl. shipping (18,42 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.031 ✔ B1 according to DIN 4102
Silver-Grey EPS with an enhanced graphite composite which improves its insulation properties. EPS based on the innovative NEOPOR material by BASF. This EPS...

Minimum quantity for "EPS Facade Thermo+ (λ=0,031)" is 1.


Extruded polystyrene foam, XPS 30 (λ ≥ 0,03, CS ≥ 300) Save 10%
42,18 kr ab 37,97 kr / m² inc. VAT, excl. shipping (30,37 kr excl. VAT and shipping)
✔ Width: 600mm ✔ Length: 1250mm ✔ Thermal conductivity: 0.033 ✔ Compressive stress by 10% relative deformation: 300 kPa ✔ Euroclass F
The XPS extruded polystyrene is a modern insulating material. Thanks to its closed-cell internal structure, it demonstrates a number of unique features,...

Minimum quantity for "Extruded polystyrene foam, XPS 30 (λ ≥ 0,03, CS ≥ 300)" is 15.


ROCKWOOL FRONTROCK SUPER ▪ mineralwool for external walls
ab 184,89 kr / m² inc. VAT, excl. shipping (147,92 kr excl. VAT and shipping)
✔ Width: 600mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.036 ✔ Euroclass A1
Façade thermal insulation ROCKWOOL FRONTROCK SUPER A dual-density rigid slab for external wall systems. Due to its high density top side, it can be...

Minimum quantity for "ROCKWOOL FRONTROCK SUPER ▪ mineralwool for external walls" is 1.


EPS Facade Gold (λ=0,038)
ab 20,00 kr / m² inc. VAT, excl. shipping (16,00 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.038 ✔ B1 according to DIN 4102
HOT DOTTED façade EPS with very high thermal insulation factor. GOLD façade EPS is recommended for thermal insulation in the ETICS (External Thermal...

Minimum quantity for "EPS Facade Gold (λ=0,038)" is 1.


EPS Facade Basic (λ = 0,044)
ab 16,13 kr / m² inc. VAT, excl. shipping (12,89 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.044 ✔ Euroclass E
Expanded polystyrene boards in the “FAÇADE” category mean high quality thermal insulation creating a barrier to heat flow, which reduces heating costs. This...

Minimum quantity for "EPS Facade Basic (λ = 0,044)" is 1.


EPS Facade Standard (λ = 0,042)
ab 17,05 kr / m² inc. VAT, excl. shipping (13,63 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.042 ✔ Euroclass E
Expanded polystyrene boards in the “FAÇADE” category mean high quality thermal insulation creating a barrier to heat flow, which reduces heating costs. This...

Minimum quantity for "EPS Facade Standard (λ = 0,042)" is 1.


EPS Facade Silver (λ = 0,040)
ab 18,16 kr / m² inc. VAT, excl. shipping (14,53 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.040 ✔ Euroclass E
Expanded polystyrene boards in the “FAÇADE” category mean high quality thermal insulation creating a barrier to heat flow, which reduces heating costs. This...

Minimum quantity for "EPS Facade Silver (λ = 0,040)" is 1.


EPS Facade Thermo (λ = 0,032)
ab 21,18 kr / m² inc. VAT, excl. shipping (16,95 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.032 ✔ Euroclass E
Silver-Grey EPS with an enhanced graphite composite which improves its insulation properties. EPS based on the innovative NEOPOR material by BASF. This EPS...

Minimum quantity for "EPS Facade Thermo (λ = 0,032)" is 1.


ROCKWOOL FRONTROCK PLUS ▪ mineralwool for external walls
ab 115,55 kr / m² inc. VAT, excl. shipping (92,45 kr excl. VAT and shipping)
✔ Width: 600mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.035 ✔ Euroclass A1
Façade thermal insulation FRONTROCK PLUS Compliance: EN 13162:2012+A1:2015 Fire Classification: non-flammable (Euro Class A1 )...

Minimum quantity for "ROCKWOOL FRONTROCK PLUS ▪ mineralwool for external walls" is 1.


EPS Facade Galaxy (λ = 0,033)
ab 17,05 kr / m² inc. VAT, excl. shipping (13,63 kr excl. VAT and shipping)
✔ Width: 500mm ✔ Length: 1000mm ✔ Thermal conductivity: 0.033 ✔ Euroclass E
Silver-Grey EPS with an enhanced graphite composite which improves its insulation properties. EPS based on the innovative NEOPOR material by BASF. This EPS...

Minimum quantity for "EPS Facade Galaxy (λ = 0,033)" is 1.


ROCKWOOL FRONTROCK L ▪ mineralwool for external walls
ab 140,89 kr / m² inc. VAT, excl. shipping (112,71 kr excl. VAT and shipping)
✔ Width: 200mm ✔ Length: 1200mm ✔ Thermal conductivity: 0.041 ✔ Euroclass A1
Façade thermal insulation ROCKWOOL FRONTROCK L Rockwool Frontrock L is a stone wool insulation lamella slab for external wall cladding in...

Minimum quantity for "ROCKWOOL FRONTROCK L ▪ mineralwool for external walls" is 1.


Atlas Uni-Grunt |fast drying priming emulsion
121,47 kr inc. VAT, excl. shipping (97,18 kr excl. VAT and shipping)
ATLAS UNI GRUNT is an impregnating sealer for priming, manufactured on the basis of the finest quality water dispersion of polymer resins....

Less than 20 available.
Ships within 1-3 business days after receipt of your payment.

+
Add to wish list
Show more

Shown 12 out of 67