Adhesive for foamed polystyrene and XPS and for execution of the reinforced layer. 2 in 1 - it is designed for fixing thermal insulation panels and for execution of the reinforced layer in thermal insulation of buildings technology. Element of thermal insulation systems – it is a part of composite thermal insulation systems, awarded with European (ETA) technological approvals. Enables fixing various expanded and extruded polystyrene boards - including expanded polystyrene boards with addition of graphite and elasticized.
- high adhesiveness
- good water vapor permeability
- reinforced with microfibres
- resistant to cracks and scratches
- for bare and rendered walls
Types of construction substrates:
- all classes of concrete,
- aerated concrete,
- cement
- plaster,
- cement-lime plaster,
- sandstone and bare walls made of brick,
- blocks,
- hollow brick and other similar ceramic or silicate materials.
Properties:
- Elastic – compensates strain resulting from the influence of temperature and usage upon other layers of the system.
- Increased resistance to cracking – it is reinforced with cellulose fibres.
- Highly adherent – strongly adheres to difficult substrates, e.g. substrates covered with strongly adhering paint coats.
- Vapor permeable – does not limit the flow of water vapor through the insulated partition.
Consumption:
Individual consumption of the adhesive depends on the properties of the substrate (its evenness among others) and on the accepted technology of fixing the panels.
- Fixing boards: from 4.0 to 5.0 kg/m2
- Reinforced layer installation: from 3.0 to 3.5 kg/m2.
Packaging:
Paper bags: 25 kg
Pallet: 1200 kg in 25 kg bags
Product comparison
Stopter K-50 | Stopter K-20 | Stopter K-100 | Hoter U | Hoter S | Grawis U | Grawis S | Roker U | Roker W | |
Insulation aplication | + | + | + | + | + | + | + | + | |
Mesh embedding | + | + | + | + | + | + | |||
Type of insulation | |||||||||
EPS | + | + | + | + | + | + | + | ||
XPS | + | + | + | + | |||||
Mineral wool | + | + | + | ||||||
Parameters | |||||||||
Adhesion to concrete | min. 0,25MPa | min. 0,25MPa | min. 0,25MPa | min. 0,25MPa | min. 0,25MPa | min. 0,25MPa | min 0,25MPa | min 0,25MPa | |
Adhesion to insulation products | min. 0,08MPa (EPS) min.0,08MPa (MW) |
min 0,08MPa | min. 0,08MPa | min. 0,08MPa | min. 0,08 MPa | min. 0,08MPa | min. 0,08MPa | min. 0,08MPa | min 0,08MPa |
Temperature of application | 5° to 30°C | 0°C to 25°C | 5°C to 30°C | 5°C to 30°C | 5°C to 30°C | 5°C to 30°C | 5°C to 30°C | 5°C to 30°C | 5°C to 30°C |
Height limit for application | |||||||||
EPS, XPS | to 25m | to 25m | to 25m | to 25m | to 25m | to 25m | to 25m | ||
Mineral wool | no limit | no limit | no limit |
VELUX glazing technical data
No posts found