Atlas Cerplast is a priming mass for renders. It ensures ideal adhesion of the render, reduces absorbability and strengthens the substrate.
Primes substrates for thin-coat renders – CERMIT (mineral and acrylic) and DEKO M.
Increases adhesion – strongly adheres to the substrate and the applied renders.
Limits the absorbability of the substrate – prevents excessive transfer of water from the freshly applied renders into the substrate.
Facilitates the execution of the next layer – the rough surfaces reduces “slip” of the applied render.
Creates temporary protective layer for the façade – protects the bare façade against weather conditions for half a year.
The main characteristics
- ensures ideal adhesion of the render
- reduces absorbability and strengthens the substrate
- facilitates render application and texture forming
- unifies the substrate colour
- available in several colours
The main parameters
- consumption: ca. 0,3 kg / m²
- adhesion: > 1.0 MPa
- drying time: 4 ÷ 6 h
Types of substrates
- concrete,
- traditional plasters on walls of bricks, blocks, or ceramic,
- cellular concrete or silicate hollow bricks,
- plasterboards,
- thermal insulation systems with EPS, XPS and mineral wool.
Properties
- Contains aggregate – increases the adhesion owing to significant development of the effective surface between the layers (creates rough surface).
- Protects the substrate against adverse effects caused by the new layer – constitutes a chemical barrier between the substrate and the render, limiting their interaction, limits colour penetration from the substrate and occurrence of stains on the surface of the render.
- High adhesion – min. 1 MPa to concrete
- White priming agent – additionally available in three colours (clinker, brown and graphite) as a primer for ATLAS DEKO M mosaic renders of selected colours.
Consumption
The average consumption is at 0.3 kg of the priming mix for 1 m2.
Packaging
Plastic buckets: 25 kg
Pallet: 600 kg in 25 buckets.
- Mineral
- Acrylic
No posts found